1 Counter value ³ comparison value ®
output is set and hysteresis activated
2 Leave hysteresis range ® output is reset
3 Counter value ³ comparison value ®
output is set and hysteresis activated
4 Leave hysteresis range, output remains set for counter value ³ comparison value
5 counter value < comparison value and hysteresis
active ® output is reset
6 counter value ³ comparison value ® output is not set for hysteresis active
7 Leave hysteresis range, output remains set for counter value ³ comparison value
With reaching the comparison condition the hysteresis
gets active. At active hysteresis
the comparison result remains unchanged until the counter value leaves the set hyste-
resis range. After leaving the hysteresis range a new hysteresis is only activated with
again reaching the comparison conditions.
1 Counter value = comparison value ®
output is set and hysteresis activated
2 Leave hysteresis range ® output is reset and counter value < comparison value
Effect at counter value
³
comparison value
Effect at pulse at compar-
ison value with pulse
duration Zero
VIPA System MICRO
Deployment I/O periphery
Counting > Counter - Additional functions
HB400 | CPU | M13-CCF0000 | en | 16-47 115
To Next Page
Loading...
