The Project view is divided into the following areas:
1 Menu bar with toolbars
2 Project tree with Details view
3 Project area
4 Device overview of the project respectively area for block programming
5 Properties dialog of a device (parameter) respectively information area
6 Hardware catalog and tools
7 "Task-Cards" to select hardware catalog, tasks and libraries
8 Jump to Portal or Project view
10.2 TIA Portal - Hardware configuration - CPU
The hardware configuration of the CPU happens in the Siemens TIA Portal by means of a
virtual PROFINET IO device. For the PROFINET interface is standardized software sided,
the functionality is guaranteed by including a GSDML file into the Siemens TIA Portal.
The hardware configuration of the CPU is divided into the following parts:
n Installation GSDML ‘VIP
A MICRO PLC’ for PROFINET
n Configuration Siemens CPU
n Connection ‘VIPA MICRO PLC’ as PROFINET IO device
The installation of the PROFINET IO devices ‘VIP
A MICRO PLC’ happens in the hard-
ware catalog with the following approach:
1. Go to the service area of www
.vipa.com.
2. Load from the download area at ‘PROFINET files ’ the file Micro_PLC_Vxxx.zip.
3. Extract the file into your working directory
.
4. Start the Siemens TIA Portal.
5. Close all the projects.
6. Switch to the Project view.
7.
Select ‘Options è Install general station description file (GSD)
’.
Areas of the Project view
Overview
Installation GSDML CPU
for PROFINET
VIPA System MICRO
Configuration with TIA Portal
TIA Portal - Hardware configuration - CPU
HB400 | CPU | M13-CCF0000 | en | 16-47 202
To Next Page
Loading...
