YASKAWA VIPA System MICRO M13-CCF0000 - 5.8 Pulse width modulation - PWM; 5.8.1 Properties

Power supply LED Description
1L+
green
DC 24V electronic section supply
DC 24V electronic section supply not available
3L+
green
DC 24V power section supply inputs OK
DC 24V power section supply inputs not available
4L+
green
DC 24V power section supply outputs OK
DC 24V power section supply outputs not available
4M
red
Error, overload respectively short circuit on the outputs
no error
5.8 Pulse width modulation - PWM
5.8.1
Properties
n By presetting of time parameters, the CPU evaluates a pulse sequence with
according pulse/pause ratio and outputs it via the according output channel.
n Channel 0 and 1 are supported
n Control by the user program via
SFB 49
More information about the usage of this block may be found in the
manual "SPEED7 Operation List" from VIP
A.
1 Period
2 On-delay
3 Pulse duration
4 Pulse pause
The counting function is disabled during the pulse width modulation on
the same channel.
VIPA System MICRO
Deployment I/O periphery
Pulse width modulation - PWM > Properties
HB400 | CPU | M13-CCF0000 | en | 16-47 123