5. T
urn power OFF and ON.
After a firmware update of the CPU you always should execute a factory
reset.
4.15 Deployment storage media - VSD, VSC
At the front of the CPU there is a slot for storage media. Here the following storage media
can be plugged:
n VSD - VIP
A SD-Card
– External memory card for programs and firmware.
n VSC - VIPASetCard
– External memory card (VSD) for programs and firmware with the possibility to
unlock optional functions like work memory and field bus interfaces.
– These functions can be purchased separately.
– To activate the corresponding card is to be installed and a Overall reset is to be
established.
Ä
Chapter 4.12 ‘Overall reset’ on page 75
A list of the currently available VSD respectively VSC can be found at
www
.vipa.com
You can cause the CPU to load a project automatically respectively to execute a com-
mand file by means of pre-defined file names.
Overview
VIPA System MICRO
Deployment CPU M13-CCF0000
Deployment storage media - VSD, VSC
HB400 | CPU | M13-CCF0000 | en | 16-47 79
To Next Page
Loading...
