3 Hardware description
3.1 Properties
n SPEED7 technology integrated
n Programmable via VIP
A SPEED7 Studio, Siemens SIMATIC Manager or Siemens
TIA Portal
n 64kbyte work memory integrated (32kbyte code, 32kbyte data)
n Work memory expandable up to max. 128kbyte (64kbyte code, 64kbyte data)
n 128kbyte load memory integrated
n Slot for external storage media (lockable)
n Status LEDs for operating state and diagnostics
n X1/X5: DI 16xDC24V with status indication integrated
n X2/X6: DO 12xDC24V 0.5A with status indication integrated
n X3/X4: Ethernet PG/OP channel for active and passive Communication integrated
n X6: AI 2x12Bit (single ended) integrated
n Technological functions: 4 channels for counter, frequency measurement and 2 chan-
nels for pulse width modulation
n Option: Extension module 2xRS485
n Option: max. 8 periphery modules
n I/O address area digital/analog 2048byte
n 512 timer/counter, 8192 flag byte
Ordering data
Type Order number Description
CPU M13C M13-CCF0000 System MICRO CPU M13C with options to extend work memory,
DI 16xDC24V
, DO 12xDC24 0.5A, AI 2x12bit and 4 channels technolog-
ical functions
EM M09 M09-0CB00 System MICRO extension: Serial interface 2x (RS485/RS422, MPI, option
PROFIBUS DP slave)
M13-CCF0000
VIPA System MICRO
Hardware description
Properties
HB400 | CPU | M13-CCF0000 | en | 16-47 33
To Next Page
Loading...
