YASKAWA VIPA System MICRO M13-CCF0000 - 3.4.1 Technical data CPU

X1 PtP
TxD
Description
green flickers
Send activity
No send activity
X2 MPI(PB)
DE
Description
green
n Slave is in DE (data exchange)
n Slave exchanges data with the master
.
n Slave is in RUN state
green blinking
n Slave CPU is in state start-up.
n Slave-CPU is without master
.
n There is no power supply
.
n Slave has no configuration.
3.4 Technical data
3.4.1
Technical data CPU
Order no. M13-CCF0000
Type CPU M13C
Module ID -
Technical data power supply
Power supply (rated value) DC 24 V
Power supply (permitted range) DC 20.4...28.8 V
Reverse polarity protection
ü
Current consumption (no-load operation) 120 mA
Current consumption (rated value) 360 mA
Inrush current 3 A
I²t 0.1 A²s
Max. current drain at backplane bus 1 A
Max. current drain load supply -
Power loss 7 W
Technical data digital inputs
Number of inputs 16
Cable length, shielded 1000 m
Cable length, unshielded 600 m
Rated load voltage DC 24 V
Reverse polarity protection of rated load voltage
ü
LEDs
VIPA System MICRO
Hardware description
Technical data > Technical data CPU
HB400 | CPU | M13-CCF0000 | en | 16-47 44