YASKAWA VIPA System MICRO M13-CCF0000 - Page 229

Event ID Description
OB : Operation mode
0: Configuration in operation mode RUN
1: STOP (update)
2: STOP (overall reset)
3: STOP (own initialization)
4: STOP (internal)
5: Start-up (cold start)
6: Start-up (cold restart/warm start)
7: Start-up (restart)
8: RUN
9: RUN (redundant operation)
10: HALT
11: COUPLING
12: UPDATING
13: DEFECTIVE
14: Troubleshooting
15: Without power
0xFD: Process image enabled in STOP
0xFE: Watchdog
0xFF: Not set
PK : Rack/slot
DatID : Not relevant to the user
0xEA70 PROFINET stack error in configuration
ZInfo1 : UnsupportedApiError.slot
ZInfo2 : UnsupportedApiError.subslot
OB : UnsupportedApiError.api
PK : Rack Slot No
DatID : UnsupportedApiError.deviceID
0xEA71 Internal PROFINET error - Please contact the hotline!
0xEA81 Internal error - Please contact the hotline!
0xEA82 Internal error - Please contact the hotline!
0xEA83 Internal error - Please contact the hotline!
0xEA91 Internal error - Please contact the hotline!
0xEA92 Internal error - Please contact the hotline!
0xEA93 Internal error - Please contact the hotline!
0xEA97 Internal error - Please contact the hotline!
0xEA98 Timeout at waiting for reboot of a SBUS module (server)
PK : Not relevant to the user
VIPA System MICRO
System specific event IDs
HB400 | CPU | M13-CCF0000 | en | 16-47 229