YASKAWA VIPA System MICRO M13-CCF0000 - Page 231

Event ID Description
0xEAC0 Internal error - Please contact the hotline!
0xEAD0 Error in configuration SyncUnit
0xEB02 Backplane bus: Present configuration does not match the actual configuration
ZInfo1 : Bit mask slots 1-16
ZInfo2 : Bit mask slots 17-32
ZInfo3 : Bit mask slots 33-48
DatID : Bit mask slots 49-64
0xEB03 System error: IO mapping
ZInfo1 : Type of error
0x01: SDB parser error
0x02: Configured address already used
0x03: Mapping error
PK : Not relevant to the user
DatID : Not relevant to the user
ZInfo2 : Slot (0=not be determined)
0xEB05 System error: Bus structure for Isochron process image not suitable
PK : Not relevant to the user
DatID : Not relevant to the user
ZInfo2 : Slot (0=not be determined)
0xEB10 System error: Bus error
ZInfo1 : Type of error
0x60: Bus enumeration error
0x80: General error
0x81: Queue execution error
0x82: Error interrupt
PK : Not relevant to the user
DatID : Not relevant to the user
0xEB11 System error during bus initialization
PK : Not relevant to the user
DatID : Not relevant to the user
0xEB20 System error: Interrupt information undefined
0xEB21 System error: Accessing configuration data
ZInfo2 : Not relevant to the user
ZInfo3 : Not relevant to the user
DatID : Not relevant to the user
0xEC03 EtherCAT: Error in configuration
ZInfo1 : Error code
1: Number of slaves is not supported.
VIPA System MICRO
System specific event IDs
HB400 | CPU | M13-CCF0000 | en | 16-47 231