YASKAWA VIPA System MICRO M13-CCF0000 - Page 245

Event ID Description
12: UPDATING
13: DEFECTIVE
14: Troubleshooting
15: Without power
0xFD: Process image enabled in STOP
0xFE: Watchdog
0xFF: Not set
ZInfo1 : Diagnostics address of the master
ZInfo2 : EtherCAT station address
0xEE00 Additional information at UNDEF_OPCODE
ZInfo1 : Not relevant to the user
ZInfo2 : Not relevant to the user
ZInfo3 : Not relevant to the user
OB : Not relevant to the user
DatID : Not relevant to the user
0xEE01 Internal error - Please contact the hotline!
0xEEEE CPU was completely overall reset, since after PowerON the start-up could not be finished
0xEF00 Internal error - Please contact the hotline!
0xEF01 Internal error - Please contact the hotline!
0xEF11 Internal error - Please contact the hotline!
0xEF12 Internal error - Please contact the hotline!
0xEF13 Internal error - Please contact the hotline!
0xEFFE Internal error - Please contact the hotline!
0xEFFF Internal error - Please contact the hotline!
VIPA System MICRO
System specific event IDs
HB400 | CPU | M13-CCF0000 | en | 16-47 245