YASKAWA VIPA System MICRO M13-CCF0000 - Page 72

VSD... Activated VSD respectively VSC with Informa-
tion for the support
...
VSC...
...
VSC-Trial-Time 71:59 Remaining time in hh:mm for deactivation of the
expansion memory respectively bus function-
ality and the CPU goes to ST
OP (abnormal
operation), if the VSC is removed. This param-
eter is only visible when the VSC of an enabled
function is removed.
Memory Extension 0 bytes Size of the additional memory, which was acti-
vated by means of a VSC.
PROFIBUS not activated Type of the PROFIBUS functionality, which was
activated by means of a VSC.
Memory Usage CPU: Information to memory configuration
LoadMem 9208 / 131072 bytes Load memory, working memory (code/data)
WorkMemCode 304 / 32768 bytes
WorkMemData 0 / 32768 bytes
PG/OP Network Information
Device Name VIPA M13-CCF0000 Ethernet PG/OP channel:
IP Address 192.168.1.211 Address information
Subnet Mask 255.255.255.0
Gateway Address 192.168.1.211
MAC Address 00:20:D5:02:74:48
Link Mode X3 100 Mbps - Full Duplex Link mode of the interfaces
Link Mode X4 Not Available
CPU Firmware Information
File System V1.0.2 CPU: Information for the support
PRODUCT VIPA M13-CCF0000
V2.0.12
Px000292.pkg
CPU: Name, firmware version, package
HARDWARE V0.1.0.0
5852A-V1
1
Mx000313.102
CPU: Information for the support
Bx000501 V2.0.12.0
Ax000136 V1.0.6.0
fx000018.wld V1.0.2.0
VIPA System MICRO
Deployment CPU M13-CCF0000
Accessing the web server > Web page with selected CPU
HB400 | CPU | M13-CCF0000 | en | 16-47 72