YASKAWA VS-606V7 Series - Page 183

182
Multi-function
Input
Seven of the following input signals are selectable: Forward run com-
mand, reverse run command, forward/reverse run (3-wire sequence),
fault reset, external fault, multi-step speed operation, JOG command,
acceleration/deceleration time select, external baseblock, SPEED
SEARCH command, ACCELERATION/DECELERATION HOLD com-
mand, LOCAL/REMOTE selection, communication/control circuit termi-
nal selection, emergency stop fault, emergency stop alarm, UP/DOWN
command, self-test, PID control cancel, PID integral reset/hold, Inverter
overheat alarm
Multi-function
Output
*5
Following output signals are selectable (1 NO/NC contact output, 2
photocoupler outputs):
Fault, running, zero speed, frequency agree, frequency detection,
overtorque detection, undervoltage detection, minor error, baseblock,
operating mode, Inverter run ready, fault retry, UV, speed search, data
output through communications, PID feedback loss detection, frequency
reference loss, Inverter overheat alarm
Standard Functions Voltage vector control, full-range automatic torque boost, slip compensa-
tion, DC injection braking current/time at startup/stop, frequency refer-
ence bias/gain, MEMOBUS communications (RS-485/422, max. 19.2 k
bps), PID control, energy-saving control, constant copy, frequency refer-
ence with built-in potentiometer, unit selection for frequency reference
setting/display, multi-function analog input
Status
Indicators
RUN and ALARM provided as standard indicators
Digital Operator
(JVOP-140)
Provided for monitor frequency reference, output frequency, output cur-
rent
Terminals Main circuit: screw terminals
Control circuit: plug-in screw terminal
Wiring Distance
between Inverter and
Motor
100 m or less
Enclosure
Open chassis (IP20, IP00)
*6
or enclosed wall-mounted NEMA 1 (TYPE
1)
*7
Cooling Method Cooling fan is provided for the following models:
200 V, 0.75 kW or larger Inverters (3-phase)
200 V, 1.5 kW or larger Inverters (single-phase)
Other models are self-cooling.
Voltage Class 200 V single-/3-phase
Model
CIMR-
V7∗T

3-phase 20P1 20P2 20P4 20P7 21P5 22P2 23P7 25P5 27P5
Single-phase B0P1 B0P2 B0P4 B0P7 B1P5 B2P2 B3P7 - -
Output Functions
Input SignalsOutput Signals
Other Functions
Indications