User Guide for the CP920 HD IP Conference Phone
140
5. Tap the Save soft key to accept the change.
Default Account
To configure the default account via phone user interface:
1. Tap Menu->Settings->Advanced Settings (default password: admin) ->Accounts.
2. Tap or to select the desired account.
3. Tap the Default soft key.
Selecting the Country for PSTN Use
To select the country which your phone operates in via phone user interface:
1. Tap Menu->Settings->Basic Settings->Country.
2. Tap or to select the desired country.
3. Tap the Save soft key to accept the change.
Flash Time
You can configure the flash time to adjust the length of time before a hook flash times out (or
the call disconnects).
Flash time can be configured from the following options:
Auto: It depends on the country that is configured for the phone (refer to Selecting the
Country for PSTN Use). The flash time is automatically set for that country.
75msec, 100msec, 300msec or 600msec: The hook flash times out after the designated
time (in milliseconds).
To Next Page
Loading...
