Using Your Phone with SIP/Cloud Account
85
To un-mute the microphone while dialing:
1. Tap again on the pre-dialing or dialing screen.
Note
Call Hold/Resume
You can place an active call on hold. Only one active call can be in progress at any time. Other
calls can be made and received while placing the original call on hold. When you place a call on
hold, your IP PBX may play music on hold to the other party while waiting.
To place a call on hold:
1. Tap the Hold soft key during a call.
LED indicators flash green. The LCD screen indicates that the call is on hold.
Note
To resume a held call:
1. Tap the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold:
1. Tap or to switch between the calls, and then tap the Resume soft key to retrieve
the desired call.
If more than one call is placed on hold, a numbered prompt appears on the LCD screen, for
example "2/3", indicating that this is the second call out of three calls.
The phone will beep softly every 30 seconds to remind you that you still have a call on hold.
You can also mute the microphone when the IP phone is ringing.
To Next Page
Loading...
