User Guide for the CP920 HD IP Conference Phone
74
4. Click Confirm to accept the change.
Note
Hotline
You can dial a hotline number immediately upon tapping the off-hook key. You can also
configure a delay, where the phone will dial out the hotline number automatically after the
designated period of time.
To configure the hotline number via phone user interface:
1. Tap Menu->Features->Hot Line.
2. Enter the desired number in the Hotline Number field.
3. Enter the delay time (in seconds) in the Hotline Delay field.
The valid values range from 0 to 10 (seconds) and the default value is “4”.
4. Tap the Save soft key to accept the change or the Back soft key to cancel.
Hotline is configurable via web user interface at the path Features->General Information.
Live dialpad is configurable via web user interface only.
To Next Page
Loading...
