Using Your Phone with SIP/Cloud Account
105
Shared Call Appearance (SCA)
Bridged Line Appearance (BLA)
Messages
If you require additional information or assistance with your new phone, contact your system
administrator.
Recording Using a USB Flash Drive
Call and Conference Recording
You can insert a USB flash drive into the USB port on your phone to manually record active calls
and conferences, or automatically record once the call is set up. Recordings are stored in *.wav
format. The filenames include a date & time stamp and the other party’s number/IP
address/name (or the first person’s number/IP address/name you called), for example,
20170707-1630-111 was created on July07, 2017, at 16:30 and you have a call with 111.
Note
When your phone is idle, and you insert a USB flash drive into the USB port on your phone, the
phone will detect the USB flash drive and display the icon and then the prompt message
“USB device is connected”.
If the phone detects the USB flash drive successfully, the icon will display on the idle
screen.
Note
Before recording any call, especially those involving PSTN, it is necessary to know about the rules
and restrictions of any governing call-recording in the place where you are. It is also very
important to have the consent of the person you are calling before recording the conversation.
Auto-Recording feature is not available by default. For more information, contact your system
administrator.
The size of a single recording file should be less than 2G.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
