Using Your Phone with Bluetooth Devices
135
5. Make sure your mobile phone is showing the same passkey, and then tap the OK soft key
on both mobile phone and IP phone.
The Bluetooth icon will display on the status bar.
Making/Receiving a Mobile Call on the IP Phone
You can enable the phone audio feature to make/receive a mobile call using the IP phone. Then
the IP phone acts as a hands free device for your mobile phone. The call is made through your
mobile phone, but the audio is present on and the call control is done by the IP phone.
For more information on how to make/receive a mobile call on the IP phone, refer to Placing a
Mobile Call over Bluetooth on page 77 and Answering Calls on page 78.
To configure the phone audio feature:
1. Pair and connect the Bluetooth-Enabled mobile phone.
2. Select the Paired Bluetooth Device from the Bluetooth field.
3. Select the connected mobile phone, tap the Option soft key.
4. Select Detail-> Channel Control.
5. Tap the or soft key to select Enabled from the Phone audio field.
6. Tap the Save soft key.
To Next Page
Loading...
