Using Your Phone with SIP/Cloud Account
77
Enter the desired number using the keypad.
Tap , , or the Send soft key.
- Tap the Hold soft key to place the original call on hold.
Tap the NewCall soft key.
Enter the desired number using the keypad.
Tap , , or the Send soft key.
You can tap or to switch between calls, and then tap the Resume soft key to retrieve
the desired call.
Placing a Mobile Call over Bluetooth
To place a Mobile Call over Bluetooth:
If you connect a Bluetooth-Enabled mobile phone with your IP phone, you can place a mobile
call on your mobile phone or IP phone. The IP phone screen and mobile phone screen both
shows the connected call. You can use the IP phone as a hands free device for the call. You can
use the IP phone to place both the mobile call and IP call, and two types of calls will not affect
each other.
Before placing a mobile call over Bluetooth, you should enable the phone audio feature first.
For more information, refer to Making/Receiving a Mobile Call on the IP Phone on page 135.
To place a mobile call over Bluetooth on your IP phone:
1. Connect a Bluetooth-Enabled mobile phone with your phone (refer to Pairing and
Connecting the Bluetooth-Enabled Mobile Phone).
2. Tap .
3. Tap the Switch soft key to select Mobile Account.
4. Enter the desired number.
5. Tap , , or the Send soft key.
To place a mobile call over Bluetooth on your mobile phone:
1. Connect a Bluetooth-Enabled mobile phone with your phone (refer to Pairing and
Connecting the Bluetooth-Enabled Mobile Phone).
2. On your mobile phone, place a call to a desired contact.
The outgoing call information appears on both your IP phone and mobile phone screen.
3. On your mobile phone, select CP920 as your audio source.
Bluetooth: the audio goes through the IP phone.
Handset earpiece or Speaker: the audio goes through the mobile phone.
The audio goes through the IP phone although the mobile phone screen also shows a
connected call. You can hold, mute or end the call on the IP phone, and after you hold the call
you can resume the call or place a new call.
To Next Page
Loading...
