Getting Started
34
2. Select IPv6 or IPv4 & IPv6 from the pull-down list of IP Mode.
3. Tap IPv6.
4. Select Static IP from the pull-down list of Type.
5. Enter the desired value in the IP address, IPv6 IP Prefix, Gateway, Pri.DNS and Sec.DNS
field respectively.
6. Tap Save to accept the change.
The touch screen will prompt “Reboot now?”.
7. Tap OK.
This configuration will take effect after a reboot.
Network is configurable via web user interface at the path Network->Basic.
To Next Page
Loading...
