Customizing Your Phone
51
Phone’s ringtones are configurable via web user interface at the path
Settings->Preference->Ring Type.
Uploading a Custom Ringtone
To set the custom ring tones, you need to upload the custom ring tones to the phone in
advance. The ring tone format must meet the following:
2MB of space should be reserved for the phone.
Note
To upload a custom ringtone for the phone via web user interface:
1. Click on Settings->Preference.
2. In the Upload Ringtone field, click Browse… to locate a ringtone file (the file format must
be *.wav) from your local system.
3. Click Upload to upload the file.
The custom ringtone appears in the pull-down list of Ring Type.
Note
Key Tone
If you enable key tone, the phone will produce a sound when you tap the onscreen dial pad.
The priority of ring tone for an incoming call on the phone is as follows: a Contact ringtone (refer
to Adding Local Contacts) >Phone ringtone.
The ring tone file must be in PCMU/PCMA audio format, mono channel, 8K sample rate and 16
bit resolution.
To Next Page
Loading...
