Customizing Your Phone
46
Setting a lock PIN
If the Skype for Business Server is configured to forcibly lock the phone, the Skype for Business
phone will prompt the user to create a lock PIN at the initial sign-in.
To set lock PIN:
1. Enter the lock PIN in the New PIN field.
2. Tap the Confirm PIN field.
3. Enter the lock PIN again in the Confirm PIN field.
4. Tap Save.
After you set a lock PIN, you can use it to unlock your phone.
Note
Locking Your Phone
When the phone lock feature is enabled, do one of the following to lock your phone:
- Tap Lock.
- The phone automatically locks after being idle for a set amount of time (in minutes).
Configuring the Idle Timeout for Phone Lock
To configure the time of automatic locking via phone user interface:
1. Tap More->Basic->Phone Lock->Idle time-out.
2. Enter the integer between 1 to 1440 minutes in the Lock Time Out(mins) field.
The PIN's length is controlled by the server. For more information, contact your
administrator.
If you do not create a lock PIN when prompted, you will be automatically signed out of the
phone in a set amount of time, and you must create a lock PIN when you sign in again.
To Next Page
Loading...
