Gigabit Color IP Phone Using the Advanced Phone Functions
To update the firmware manually via Web interface:
1) Choose Phone->Upgrade, click the Browser button to select the firmware file in
your local computer.
2) Click Upgrade button to update the new firmware.
To update the firmware automatically refer to “Auto Provision”.
If the phone upgrade failed, the phone interface will show as below, you can obtain the
IP address and then you can upgrade again via web interface.
1) Enter the IP address in the Web browser.
2) Enter into the upgrade interface.
3) Choose the firmware to upgrade again, or input the URL which is the firmware’s
server address.
4) Click the Upgrade or Confirm button to upgrade.
To Next Page
Loading...
