EasyManuals Logo

Yealink SIP-T38G Manual

Yealink SIP-T38G
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #108 background imageLoading...
Page #108 background image
Gigabit Color IP Phone Using the Advanced Phone Functions
Intercom and Voicemail on your phones. Please contact your system administrator
for more information.
2. Users can also connect EXP38/EXP39 to extend the DSS keys to 48 or more.
Line
You can set these keys as line keys to active up to the six user accounts.
To assign the key as Line:
Choose DSS Key->Memory Key or Line Key, choose one of the link key you want to
make the assignment, there is a pull-down menu in the Type field, choose Line from the
list, press Confirm button to save the changes.
Speed Dial
You can configure the key as a simplified speed dial key. This key function allows you
access the most frequently dialed numbers easily.
To assign the key as Speed Dial:
1) Choose DSS Key->Memory Key or Line Key, choose one of the keys you want to
make the assignment, there is a pull-down menu in the Type field, choose Speed
Dial from the list.
2) Enter the number you want to perform Speed Dial in the Value field.
3) In the "Line" field, select a line for which to apply this key.
4) Press Confirm button to save the changes.
BLF
You can configure the key for Busy Lamp Field (BLF) which allows you to monitor the
status (idle, ringing, or busy) of other SIP accounts. User can dial out on a BLF
configured key.
To assign the key as BLF:
1) Choose DSS Key->Memory Key or Line Key, choose one of the keys you want to
make the assignment, there is a pull-down menu in the Type field, and choose BLF
from the list.
2) Enter the number you want to monitor in the Value field,
3) In the "Line" field, select a line for which to apply this key.
4) And then enter the feature codes in the extension field.
5) Press Confirm button to save the changes.
Please refer to LED Instruction for more details about the LED status in different
situation.
Note:
User can also set the pickup number to active the pickup function. For example, if you
set the BLF number as 212, and the pickup number is *83, then when there is an
incoming call to 212, press the BLF key, it will call out the *83 automatically to pickup
the incoming call on 212.

Table of Contents

Other manuals for Yealink SIP-T38G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T38G and is the answer not in the manual?

Yealink SIP-T38G Specifications

General IconGeneral
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Keypad number of keys48
Touchscreen-
Display resolution480 x 272 pixels
Display number of colors16.78 million colors
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.711, G.722, G.723.1, G.726
BluetoothNo
Security algorithms802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage100 - 240 V
AC adapter output voltage5 V
Power consumption (typical)4.6 W
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Compliance industry standardsIEEE 802.3af
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth204 mm
Width273 mm
Height42 mm
Weight1050 g

Related product manuals