Gigabit Color IP Phone Using the Basic Call Functions
During an Active Call
Mute
This function allows you to mute the microphone of the active audio device during a call;
you cannot be heard by the other party. You can still hear all other parties while mute
is enabled. When you press the MUTE button all of the conversation will be muted.
To mute/resume a conversation:
Press MUTE button during a conversation, the icon will be shown in the LCD. Press
it again to get the microphone return to normal conversation.
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/retrieve a call:
1) Press the HOLD button or Hold soft key to put your active call on hold.
2) During the call, there will be a "dodo...” sound for each 30 second, suggesting that
there is a current call in Hold state.
3) If there is only one call on hold, press the Resume soft key or HOLD button to
retrieve the call.
4) If there are more than one call on hold, press the Up/Down navigation key to
highlight the call, then press the Resume soft key or HOLD button to retrieve the
To Next Page
Loading...
