Yealink SIP-T38G Manual

Gigabit Color IP Phone Using the Basic Call Functions
Answering a call
Answering an incoming call
1) If you are not on an active call, lift the handset to answer it using the handset, or
press the Speaker button to answer it using the speakerphone, or press the
headset button to answer it using the headset.
2) If you are on an active call, the LCD will prompt to display: Incoming Call ： xxx.
Press Answer soft key to answer the call, or Reject soft key to refuse it.
During the conversation, you can alternate between Headset, Handset and Speaker
mode by pressing the corresponding buttons or picking up the handset.
Denying an incoming call
Press Reject soft key or X button to deny the incoming call directly.

Yealink SIP-T38G Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Touchscreen	-
Display resolution	480 x 272 pixels
Display number of colors	16.78 million colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g