Yealink SIP-T38G Manual

Gigabit Color IP Phone Overview
Auto Redial
Auto redial is a telephone feature that redials a busy number in a fixed number of times
before giving up.
To set auto redial via phone interface:
1) Press Menu->Features->Auto Redial to enter the configuration page.
2) By the Switch soft key, you can choose whether to enable the auto redial function.
3) Press the navigation keys to choose and set the redial interval. It is measured by
second.
4) Press the navigation keys to choose and set the redial times.
5) Press Save soft key to save the changes.
Note:
When you dial a busy number after setting the auto redial function to Enable, the phone
will pop up a Auto Redial window to make sure whether you want to redial. If you want,
press OK. If you do nothing in this interface for 5 seconds, it will turn to the idle
interface automatically.
To set auto redial via the Web interface:
1) Choose Phone-> Features-> Auto Redial.
2) Choose Enabled or Disabled in the pull-down menu.
3) Enter the redial interval and redial times in the corresponding fields.
4) Click Confirm button to save the change.

Yealink SIP-T38G Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Touchscreen	-
Display resolution	480 x 272 pixels
Display number of colors	16.78 million colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g