Yealink SIP-T38G Manual

Gigabit Color IP Phone Using the Basic Call Functions
To Semi-Attended Transfer via phone interface:
1) A and B is on an conversation, A press the TRAN button or Tran soft key to put B on
hold, then A can dial a new number C and press the OK or SEND button to call out.
2) While C is ringing, A hang up or press the Transfer soft key. Then A will turn to hold
status, and the LCD will display as Transferred.
3) A will be disconnected from the call, when C pick up, B can talk to C.
Local Conference
You can establish a three-party conference, during the conversation three phone
parties can communicate with each other. Use this function must enable this option via
web interface.
To enable local conference via web interface:
1) Choose Account->Account X->Advance->Conference Type, there is a pull-down
menu, choose Local Conf from the list.
2) Press Confirm button to save the changes.
To establish a local conference:
1) Press the Conf soft key during an active call.
2) The first call is placed on hold. You will hear a dial tone. Dial the number to
conference in, then press the Send soft key.
3) When the call is answered, you can have a private conversation at first. And then
press the CONF button, the conference call will include you and the other two
parties.
4) During the conference, press the Split soft key to split the conference into two hold
lines, and press the Resume soft key to resume the chosen call respectively.
5) When you press the hold key, the conference will be on hold.
6) Hang up to disconnect all parties.

Yealink SIP-T38G Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Touchscreen	-
Display resolution	480 x 272 pixels
Display number of colors	16.78 million colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g