Yealink SIP-T38G Manual

Gigabit Color IP Phone Using the Basic Call Functions
Network Conference
If you want to make a conference with more than three people, you can open the
function of network conference. This function needs the server’s support.
If you enabled this function, you can put the meeting conference on the server.
To enable network conference via web interface:
1) Choose Account->Account X->Advance->Conference Type, there is a pull-down
menu, choose Network Conf from the list.
2) Enter the Conference URI in the Conference URI field.
3) Press Confirm button to save the changes.
To establish a network conference:
1) Press the Conf soft key during an active call.
2) Dial the number to conference in, then press the Send soft key
3) When the call is answered, press the CONF button.
4) After starting a three way conference, press Conf button to enter Conference
dialing interface and invite another party to participate in teleconference.
5) After starting conference, press Hold key to Hold local call without influencing
others in conference.

Yealink SIP-T38G Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Touchscreen	-
Display resolution	480 x 272 pixels
Display number of colors	16.78 million colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g