EasyManuals Logo

Yealink SIP-T38G Manual

Yealink SIP-T38G
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
Gigabit Color IP Phone Using the Advanced Phone Functions
DTMF
You are allowed to send out the desired DTMF number during the conversation. The
number needs to be set in advance.
To assign the key as DTMF:
1) Choose DSS Key->Memory Key or Line Key, choose one of the keys you want to
make the assignment, there is a pull-down menu in the Type field, choose DTMF
from the list.
2) In the Value field, enter the specific number.
3) Press Confirm button to save the changes.
Prefix
When you set up the function of prefix, press this key, the phone will be ready to make
a new call, and show up the content which you’re set previously on the dial interface.
And you could enter other figure and call out
To assign the key as Prefix:
1) Choose DSS Key->Memory Key or Line Key, choose one of the keys you want to
make the assignment, there is a pull-down menu in the Type field, and choose
Prefix from the list, and enter the number you want to show up on the dial interface
in the Value field.
2) Press Confirm button to save the changes
Local Group
The keys can be configured as Local Group key. Then pressing this key under the idle
status, you can enter the Local Group interface.
To assign the key as Local:
1) Choose DSS Key->Memory Key or Line Key, choose one of the keys you want to
make the assignment, there is a pull-down menu in the Type field, and choose Local
Group from the list.
2) In the Line field, choose a Contacts or group, if you want to select a group, you
must add a group at first.
3) Press Confirm button to save the changes.
XML Group
The keys can be configured as XML Group key. Then pressing this key under the idle
status, you can enter the XML Group interface.

Table of Contents

Other manuals for Yealink SIP-T38G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T38G and is the answer not in the manual?

Yealink SIP-T38G Specifications

General IconGeneral
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Keypad number of keys48
Touchscreen-
Display resolution480 x 272 pixels
Display number of colors16.78 million colors
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.711, G.722, G.723.1, G.726
BluetoothNo
Security algorithms802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage100 - 240 V
AC adapter output voltage5 V
Power consumption (typical)4.6 W
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Compliance industry standardsIEEE 802.3af
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth204 mm
Width273 mm
Height42 mm
Weight1050 g

Related product manuals