User Guide for the SIP-T42S IP Phone
94
Answering Calls
When you are not in another call, you can answer a call in one of three ways:
Using the handset
Using the speakerphone
Using the headset
Note
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free (speakerphone) mode:
Do one of the following:
- Press .
- With the handset on-hook and the headset mode deactivated, press the Answer soft key.
- With the handset on-hook and the headset mode deactivated, press the line key with the
fast-flashing green LED indicator.
To answer a call using the headset:
Do one of the following:
- Press .
- With the headset mode activated, press the Answer soft key.
- With the headset mode activated, press the line key with the fast-flashing green LED
indicator.
Answering When in Another Call
If you have an active call, and an incoming call arrives on the phone, do one of the following:
- Press the Answer soft key.
The incoming call is answered and the original call is placed on hold.
You can reject incoming calls by pressing the X key or the Reject soft key. You can also activate
Do Not Disturb mode to ignore the incoming calls without ringing on your phone. For more
information, refer to Do Not Disturb (DND) on page 101.
You can forward incoming calls to someone else by pressing the Forward soft key. For more
information, refer to Call Forward on page 105.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
