User Guide for the SIP-T42S IP Phone
80
You can click Reset To Default to reset custom settings to defaults.
Then you can press the keys on the phone to perform the features you configured.
For example:
Switch Account Up
You can use this key feature to change the default account.
Dependencies:
Type
(Switch Account Up)
Usage: Press the Switch Account Up key to scroll up the account list to select the desired
default account.
Switch Account Down
You can use this key feature to change the default account.
Dependencies:
Type (Switch Account Down)
Usage: Press the Switch Account Down key to scroll down the account list to select the desired
default account.
Account Management
You can register one or multiple accounts on the SIP-T42S IP phone. You can also configure
each line key to associate with an account or configure multiple line keys to associate with an
account.
Account Registration
To register an account via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Accounts.
2. Select the desired account and then press the Enter soft key.
3. Select Enabled from the Activation field.
4. Enter the desired value in Label, Display Name, Register Name, User Name, Password
and SIP Server1/2 field respectively. Contact your system administrator for more
information
5. If you use the outbound proxy servers, do the following:
1) Press or , or the Switch soft key to select Enabled from the Outbound Status
field.
2) Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval field
To Next Page
Loading...
Need help?
General
Weight and Dimensions
