Yealink SIP-T42S - Using SCA Feature on the IP Phone

Advanced Phone Features
167
3. Enter the call pull feature access code (e.g., *11) in the Call Pull Feature Access Code field.
4. Click Confirm to accept the change.
The phone will dial out “*11” automatically when you press the Call Pull soft key.
Using SCA Feature on the IP Phone
This section provides you with detailed information on using the SIP-T42S IP phone in a SCA
Hybrid Key System scenario. In a SCA Hybrid Key System scenario, the status of the line key LED
which associates with a shared line will change. For more information on line key LED indicators,
refer to LED Instructions on page 5.
You can do the following using the IP phone in a SCA Hybrid Key System scenario:
 Placing calls
 Answering calls
 Placing a call on hold
 Retrieving a held call
 Barging in an active call
 Call Pull