User Guide for the SIP-T42S IP Phone
24
key to activate Wi-Fi mode directly and scan Wi-Fi devices automatically.
To activate the Wi-Fi mode via phone user interface:
1. Press Menu->Settings->Basic Settings->Wi-Fi.
2. Press or , or the Switch soft key to select On from the Wi-Fi field.
3. Press the Save soft key.
The IP phone scans the available wireless networks in your area.
Connecting to the Wireless Network
Three ways to connect SIP-T42S IP phone to the wireless network:
Manually connect to an available wireless network
Wi-Fi Protected Setup (WPS)
Manually add a wireless network
Manually Connect to an Available Wireless Network
To manually connect to a wireless network via phone user interface:
1. Press Menu->Settings->Basic Settings->Wi-Fi.
2. Press or to highlight X Available Network(s) (X represents the number of
available networks), and then press the Enter soft key.
If there is no available wireless network, press the Scan soft key to search for the wireless
network again.
3. Press or to select the desired wireless network.
4. Press the Connect soft key.