User Guide for the SIP-T42S IP Phone
126
Group Call Pickup
To enable group call pickup and configure the group call pickup code on a global basis via
web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Group Call Pickup.
3. Enter the group call pickup code in the Group Call Pickup Code field.
4. Click Confirm to accept the change.
To configure the group call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
To Next Page
Loading...
