User Guide for the SIP-T42S IP Phone
40
Key As Send
You can set the "#" key or "*" key to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Press Menu->Features->Key As Send.
2. Press or , or the Switch soft key to select # or * from the Key As Send field, or
select Disabled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General Information.
Phone Lock
You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
Phone lock consists of the following:
Menu Key: The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
Function Keys: The function keys are locked. You cannot use the MESSAGE, REDIAL,
MUTE, OK, X, navigation keys and soft keys until unlocked.
All Keys: All keys are locked, except the Volume key, digit keys, # key, * key,
Headset key and Speakerphone key. You are only allowed to dial
emergency numbers, reject incoming calls by pressing the X key or
the Reject soft key, answer incoming calls by lifting the handset,
pressing the Speakerphone key, the HEADSET key, the Answer soft
key or the OK key, and end the call by hanging up the handset,
pressing the Speakerphone key, the End Call soft key or X key.
Note
To activate the phone lock via phone user interface:
1. Press Menu->Settings->Basic Settings->Phone Lock.
2. Enter the desired PIN (default PIN: 123) in the Unlock PIN field, and then press the OK soft
key.
The emergency number setting, if desired, must be set before lock activation. For more
information, refer to Emergency Number on page 88.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
