User Guide for the SIP-T42S IP Phone
178
Placing a Call on Hold
To place a call on hold:
1. Press the Hold soft key on phone A when party A and party C are talking.
The line key LEDs on phone A slowly flash green and phone B slowly flash red when the
bridged line call is placed on hold.
Retrieving a Held Call
If there is a held call between phone A and phone C, you can retrieve a held call on either phone
A or phone B.
To retrieve the held call on phone A:
1. Press the line key with the slow-flashing green LED indicator or the Resume soft key on
phone A.
The conversation between phone A and phone C is retrieved.
To retrieve the held call on phone B:
1. Press the line key with the slow-flashing red LED indicator on phone B.
The conversation is established between phone B and phone C, phone A disconnects the
call.
Messages
Short Message Service (SMS)
You can send and receive text messages using the SIP-T42S IP phone. New text messages can
be indicated both acoustically and visually. When receiving a new text message, the phone will
play a warning tone. The power indicator LED will slowly flash red, and the LCD screen will
prompt “n New Text Message(s)” (“n” indicates the number of unread text messages. e.g., 1 New
Text Message(s)).
Note
When the phone receives a text message, the text message prompt window will pop up by
default, if you want to disable the feature, contact your system administrator for more
To Next Page
Loading...
