Advanced Phone Features
147
the same time, or not in the office for very long, which means that actual personal offices would
be often vacant, consuming valuable space and resources.
You can use hot desking on the SIP-T42S IP phone to log out of existing accounts and then log
into a new account. As a result, many users can share the phone resource at different times. To
use this feature, you need to configure a hot desking key in advance.
Note
To configure a hot desking key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Hot Desking from the Key Type field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Hot desking key is configurable via web user interface at the path Dsskey->Line Key.
To use hot desking:
1. Press the hot desking key when the phone is idle.
The LCD screen prompts the following warning:
2. Press the OK soft key, registration configurations of all accounts on the phone will be
cleared immediately.
The login wizard will be displayed as below:
3. Enter the login information in each field.
4. Press the Save soft key to login or the Back soft key to cancel.
Hot desking is not available on all servers. Contact your system administrator for more
information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
