EasyManuals Logo

Yealink SIP-T42S User Manual

Yealink SIP-T42S
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
User Guide for the SIP-T42S IP Phone
68
The default device name is “Yealink T42S”.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
The preconfigured Bluetooth device name will display in scanning list of other devices.
Disconnecting the Bluetooth Headset
You can disconnect the Bluetooth headset from your phone. After you disconnect the Bluetooth
headset, it will still remain paired and be displayed in the Paired Bluetooth Device list. So you
can easily connect it to your IP phone again.
To disconnect your Bluetooth headset from your phone:
1. Press Menu->Settings->Basic Settings->Bluetooth->Paired Bluetooth Device.
2. Select the connected Bluetooth headset.
3. Press the Disconnect soft key.
The Bluetooth headset is disconnected. To connect it to your IP phone again, press the
Connect soft key.
Deleting the Paired Bluetooth Headset
You can delete your Bluetooth headset from your phone. When you delete the Bluetooth
headset, it will disappear from the Paired Bluetooth Device list. To connect it to your IP phone
again, you need to scan and connect it again.
To delete your Bluetooth headset from your phone:
1. Press Menu->Settings->Basic Settings->Bluetooth->Paired Bluetooth Device.
2. Select the Bluetooth headset you want to delete.
3. Press the Option soft key, and then select Delete.
The LCD screen prompts the following warning “Delete selected item?”.
4. Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
Note
You can also delete all headsets by pressing the Option soft key and then select Delete All. For
more information, refer to the above steps.
If you cannot connect a Bluetooth headset to the phone successfully, we recommend that you
delete the Bluetooth headset from the Paired Bluetooth Device list (if it exists) before pairing it.

Table of Contents

Other manuals for Yealink SIP-T42S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T42S and is the answer not in the manual?

Yealink SIP-T42S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal2.7 \
Display resolution192 x 64 pixels
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys6
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals