User Guide for the VC400 Video Conferencing System
108
- If you select Camera and PC or PC, the PC presentation is shown in big size, and
other video images along the right side of the screen are shown in small size.
- If you select Camera, the remote video image is shown in big size, and local video
image along the right side of the screen is shown in small size. The presentation ends.
Changing the Video Layout
During a conference call, local and remote video images are displayed on the display device.
You can change the screen layout. The system supports three screen layouts.
One big, other small ( ): The selected video image is shown in a big size format, the
other video images along the right side of the screen are shown in small sizes.
Full screen ( ): The selected video image is shown in full size.
Same size ( ): All video images are shown in the same size.
One display devices (single screen) is connected to the VC400 codec, the default screen
layout is described below:
When there is one active call and local system does not start a presentation, the remote
video image is shown in full size.
When there are multiple active calls (take 4 parties as an example) and the local system
does not start a presentation, both local and remote video image are shown in the same
size.
To Next Page
Loading...
