Yealink VC400 - Search Source List in Dialing

Customizing the VC400 Video Conferencing System
67
The contacts whose names or phone numbers match the characters entered will appear on
the display device.
5. You can press or to select the desired contact, and then call or edit the contact.
Search Source List in Dialing
You can search for a contact from the desired lists when the phone is in the pre-dialing screen.
The lists can be History, Local Directory, Cloud Contacts and LDAP.
In the pre-dialing screen, when you enter a few characters, the system will search the matched
contacts from the enabled search source lists, and display the result in the dialing screen.
If you want to match the LADP list, LDAP are configured already. For more information on how
to configure LDAP, contact your system administrator.
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled column
and click .
The selected list appears in the Enabled column.
3. Repeat step 2 to add more lists to the Enabled column.
4. (Optional.) To remove a list from the Enabled column, select the desired list and then
click .