User Guide for the VC400 Video Conferencing System
80
Audio Setting
Audio Output Device
The system supports the following audio devices:
Auto (audio output device with the highest priority is selected automatically)
VCS Phone (VCP40 phone)
HDMI (built-in speakerphone of the display device)
Line Output (speakerphone connected to the Line Out port on the VC400 codec)
By default, the system automatically selects the audio output devices with the highest priority.
The priority is: VCS Phone> HDMI>Line Output. If the audio output device with the highest
priority is removed from the VC400, the VC400 will select the next highest priority device.
You can also specify the desired audio output device via the remote control or the web user
interface.
To configure the audio output device via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Video & Audio menu.
3. Press or to scroll to Audio Settings, and then press .
4. Select desired audio output device from the pull-down list of Audio Output.
5. Press (Save soft key) to accept the change.
Audio output device is configurable via web user interface at the path Setting->Video &
Audio->Audio Output.
To Next Page
Loading...
