Yealink VC400 - Placing Calls

Using the VC400 Video Conferencing System
87
- If you select Enabled, the system will attempt to call other system using different call
types according the priority.
3. Click Confirm to accept the change.
Placing Calls
You can place a call in three ways using your VC400 video conferencing system:
 Using the remote control
 Using the VCP40 phone
 Via web user interface
The VC400 video conferencing system supports two call modes:
 Voice Call
 Video Call
Note
You can search and dial a contact from the call history or local directory. For more information,
refer to Directory on page 59 and Call History Management on page 71.
The system supports placing calls using contact numbers, SIP URI, IP address, H. 323 account or
extension. SIP URI and IP addresses can be up to 32 characters. For example: SIP
URI:2210@sip.com, IP: 192.168.1.15.
For more information, contact your system administrator.