Overview
19
Web User Interface
You can customize your system via web user interface. To access the web user interface, you
need to know the IP address of your new system.
To obtain the IP address, do one of the following:
The IP address of the system is shown on the top right corner of the display device.
Press (Menu soft key) on your remote control and select Status ->Network.
The display device shows network information about the system.
Press on the VCP40 phone when the phone is idle and select Network.
The LCD screen of the phone displays the network information of the system.
Log into the web user interface:
1. Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of a web
browser on your PC, and then press the Enter key.
2. Enter the administrator user name and password.
The default user name is “admin” (case-sensitive), and the default password is “0000”.
3. Click Login.
After you log into the web user interface successfully, you can click Logout on the top right
corner of the web interface to log out.
Remote Control
You can use the remote control and display device to configure and use the VC400 video
conferencing system.
For more information on the function of each key on the remote control, refer to VCR10 Remote
Control on page 12.
The Advanced option is only accessible to the administrator. The default administrator
To Next Page
Loading...
