Yealink VC400 - Icon Instructions; Icons on Display Device

User Guide for the VC400 Video Conferencing System
14
Item
Description
⑰
Keypad
 Enters digits.
 Long press to generate a special character “@” in
the input field.
 Enters the pre-dialing screen.
 Stores the preset position of the camera.
⑱
Video Recording Key
 Generates a special characters “.”.
 On the idle screen, press to start/stop recording
video.
 During a call, long press to start/stop recording
video.
⑲
Snapshot Key
 Generates a pound key (#).
 On the idle screen, press to capture the image
from the camera.
 During a call, long press to capture the image
from the camera.
Icon Instructions
Icons on Display Device
Icons appearing on the display device are described in the following table:
Icon
Description
(flashing)
Network is disconnected
Network is available
Packet loss
(flashing)
VCP40 video conferencing phone is not connected
(flashing)
Camera is not connected
SIP account is registered
H.323 account is registered