User Guide for the VC400 Video Conferencing System
20
password is “0000”. For more information on how to view, enter and edit the menu settings on
the display device, refer to Navigating Menus on the Display Device on page 36 and Entering
Data and Editing Fields on page 38.
Remote Control via Web User Interface
In addition to using the remote control, you can also control the video conferencing system via
web user interface.
To control video conferencing system via web user interface:
1. Click Home->Remote Control when the system is idle or during a call.
2. Click the keys on the virtual remote control to control the video conferencing system.
3. Click Remote Control to hide the virtual remote control.
Documentations
The following table shows documentations available for the VC400 video conferencing system.
Yealink VC400 Video
Conferencing System
Quick Start Guide
System installation
and network
configuration
On the website/ In
the package
To Next Page
Loading...
