Yealink VC400 - Entering Data and Editing Fields

User Guide for the VC400 Video Conferencing System
38
6. Click Confirm to accept the change.
To change keyboard input method via the remote control:
1. Press (Keyboard soft key) or (Keyboard soft key).
The display device displays the on-screen keyboard.
2. Press (abc soft key) to change the input method.
Entering Data and Editing Fields
You can enter data and edit fields using the keypad on the remote control or the on-screen
keyboard on the display device:
To enter or edit data:
1. Select the field.
2. Do one of the following:
If you want to
You can
Entering numbers.
Press the digit keys on the remote control.
Entering letters.
1. Press (Keyboard soft key) to open the
on-screen keyboard. If the system is in the
dialing screen, press (Keyboard soft
key) to open the on-screen keyboard.
2. Press the navigation keys on the remote
control to select desired letters.
3. Press (abc soft key) to switch input
method.
4. Press .
5. Press (Exit Keyboard soft key) to exit
from the on-screen keyboard.
Entering special characters.
1. Press (Keyboard soft key) to open the
on-screen keyboard. If the system is in the
dialing screen, press (Keyboard soft
key) to open the on-screen keyboard.
2. Press (abc soft key) to switch the
input method to @#%.
3. Press the navigation keys on the remote
control to select desired characters.
4. Press .
5. Press (Exit Keyboard soft key) to exit
from the on-screen keyboard.