Using the VC400 Video Conferencing System
113
To control the camera when the system is idle via the remote control:
1. Press the navigation key to adjust the angle of the camera.
The display device shows the current angle of the camera.
2. Long press or to adjust the focus of the camera.
The display device shows the focus of the camera.
Configuring Camera Presets
Up to 10 presets can be assigned to the numeric key. Each camera preset stores the camera pan,
tilt, and zoom settings. You can store the preset to a numeric key via the remote control or web
user interface. This means that you can adjust the camera to the preset position by pressing a
To Next Page
Loading...
