Using the VC400 Video Conferencing System
117
2. Select the Enabled from the pull-down list of Recording.
3. Click Confirm to accept the change.
To record video when the system is idle via the remote control:
1. Press to start recording and then again to stop recording.
To record video during a call via the remote control:
1. Do one of the following:
- Long press to start recording and long press again to stop recording.
- Press (More soft key) to open More screen.
Press or to scroll to USB Recording, and then press to start recording.
Open the More screen, scroll to USB Recording again, and then press to stop
recording.
To record video during a call via the video conferencing phone:
1. Press the Start REC soft key to start recording and press the Stop REC soft key again to
stop recording.
To Next Page
Loading...
