Yealink W53P

Yealink W53P & W60P User Guide
30
Locking Handset Keypad
Procedure
1. Long pressthe # key when the handset is idle until the phone prompts you the handset is locked.
The lock icon appears in the status bar.
Unlocking Your Phone
Procedure
1. Long pressthe # keywhen the locked handset is idle until the phone prompts you the handset is unlocked.
The lock icon disappears from the status bar.
Handset Registration
You can register a handset to 4 different base stations at most.
Note
Up to 8 handsets can be registered to one base station.
Topics
Registering a Handset to a Base Station
Registering a Handset to Multiple Base Stations
Deregistering a Handset
Selecting a Base Station to Connect
Renaming the Base Station
Registering a Handset to a Base Station
Before You Begin
When the phone prompts "Unregistered!", long press on the base station till the registration LED flashes.
Procedure
1. Press the Reg soft key to register the handset quickly.
After the handset is registered successfully, the phone prompts “Handset Subscribed” and “Base NO. (The last 4 char-
acters of the connected Base’s MAC address)”.
After the handset initializes data successfully, an icon with the internal handset number and handset name appears on
the phone screen.
Tip
You can also press the OK soft key, select Register Handset and then select the desired base to register the handset. You
need to enter the base PIN (default: 0000) after a base is found.
Registering a Handset to Multiple Base Stations
You can register a handset to 4 different base stations.
Before You Begin