Yealink W53P

Yealink W53P & W60P User Guide
62
l If you want to park the call against the local extension, press the # key.
l If you want to park the call against the desired extension, enter the extension (for example, 4606) where you
want to park the call and press the # key.
If the call is parked successfully, you will hear a voice prompt that the call is parked.
Retrieving a Parked Call in the FAC Mode
Before You Begin
Your system administrator has set call park in the FAC mode. There is a call parked on the extension. Get the park
retrieve code from your system administrator.
Procedure
1. Dial the park retrieve code.
2. Follow the voice prompt to retrieve:
l Press the # key on the phone where the call is parked.
l Enter the desired extension followed by # (for example, 4606#) on any phone.
Related Topic
Retrieving a Call with a Retrieve Key
Parking or Retrieving a Call in the Transfer Mode
Your system administrator has set the Transfer mode in which you can park and retrieve a call on your phone.
Topics
Parking a Call in the Transfer Mode
Retrieving a Parked Call in the Transfer Mode
Parking a Call in the Transfer Mode
Before You Begin
Your system administrator has set call park in the Transfer mode.
Procedure
1. During a call, press Options, and then select Call Park.
The call will be directly transferred to the shared parking lot.
Retrieving a Parked Call in the Transfer Mode
Before You Begin
Your system administrator has set call park in the Transfer mode. There is a call parked on the shared parking lot.
Procedure
1. Dial the retrieve lot.
The phone will retrieve the parked call from the shared parking lot.
Tip
When the phone is idle, you can use a Retrieve key to retrieve a parked call directly.