Customizing Your Phone
31
Long press on the base station till the registration LED flashes.
Procedure
1. Navigate to OK->Settings->Registration->Register Handset.
2. Select the desired base and then press OK.
The handset begins searching for the base.
3. Press OK after a base is found.
4. Enter the base PIN (default: 0000), and then press Done to complete registration.
After registration, the phone prompts “Handset Subscribed” and “Base NO. (The last 4 characters of the connected
Base’s MAC address)”.
After the handset initializes data successfully, an icon with the internal handset number and handset name appears on
the phone screen.
Deregistering a Handset
You may need to de-register your handset if you want to replace a base station.
Procedure
1. Navigate to OK->Settings->Registration->De-reg. Handset.
2. Enter the system PIN (default: 0000), and then press Done.
The phone screen displays the handsets names that are registered to the same base station. The name of the hand-
set itself is highlighted and followed by a left arrow.
3. Select the desired handset, and then press OK.
The phone screen prompts you whether to deregister the handset.
4. Press Yes.
Selecting a Base Station to Connect
One handset can be registered to multiple base stations, but only one base station is the active one, and others remain
saved in the list of available base stations. You can connect the handset to a desired base manually, or allow the hand-
set to connect the base station with the best reception automatically.
Procedure
1. Navigate to OK->Settings->Registration->Select Base.
The phone screen displays all base stations that the handset is registered to and the Bestbase option. The radio box
of the currently used base station with the last 4 characters of MAC address is marked.
2. Select the desired base station or Bestbase, and then press Select.
The handset begins to search for a base station. After a successful connection, the phone screen prompts “Base
selected successfully!”.
Renaming the Base Station
Procedure
1. Navigate to OK->Settings->Registration->Select Base.
2. Select a desired base station (expect Bestbase option), and then press Rename.
3. Enter the desired name in the Rename field.
4. Press Save.
To Next Page
Loading...
